Mitel MiVoice 4425 IP Vision User Manual page 35

M V 4425 IP V
I OICE ISION
2.15.4
2.15.4.1
2.15.4.2
2.15.4.3
2.15.4.4
2.15.4.5
2.15.5
2.15.5.1
35
(DBC 425) M V
FOR I OICE
HEADSET
This function offers you the possibility to use a headset when making or receiving calls.
Making Calls
1) Press the Headset key (not needed in headset preset mode).
2) Dial the wanted number.
3) Press the Clear key to finish the call.
Receiving Calls
Press the Headset key to receive a call.
Changing from Headset to Handset
Lift the handset to change from a headset to the handset.
Changing from Handset to Headset
Press the Headset key and replace the handset to change from the handset to a
headset.
Clearing a Call
Press the Clear key to clear a call.
HEADSET PRESET
By default the phone is set for calls to be connected to the loudspeaker when you
answer or make calls by pressing a Line key, so called Loudspeaker Preset. Also
when you dial the number without lifting the handset, the call is automatically
connected to the loudspeaker.
When you use a headset for your telephone, you can change the setting to get calls
connected to the headset instead, so called Headset Preset. When the Loudspeaker
key is pressed in this mode the call is connected to the loudspeaker as long as the
Speaker key is active.
Note: Independent the type of preset setting, when you lift the handset the call is
always connected to the handset. Activation and cancellation of Headset Preset
can only be done when the phone is in idle mode.
Activating Headset Preset Mode
To activate headset preset mode, press the Headset key and hold it down for 4
seconds. A ring signal is heard as acknowledgment and the headset icon is displayed.
MX-ONE
6/1553-ANF 901 54 Uen S2 2016-03-08