Monitor Rear View; Figure 3. Rear View Of Monitor; Table 3. Rear View Features And Descriptions - Nonin RespSense LS1R-9R Operator's Manual

Monitor Rear View

The moisture trap, filter, and equipment label are located on the back of the RespSense
(figure 3). Names and descriptions of each component are listed in table 3.
2
4
No. Name
Single-Use,
1
Disposable
Moisture Trap
with Filter
Attachment
2
Holes
Luer Lock
3
Equipment
4
Label
Figure 3: Rear View of Monitor
Table 3: Rear View Features and Descriptions
The filter is a single-use disposable component and should be replaced
after each patient use or cleaning. It fits into the moisture trap and
protects the monitor from moisture. The moisture trap clicks into
position from the left hand side of the monitor.
When the moisture trap is removed, guide marks (numbered 1 and 2)
and arrows are visible on the back of the monitor. These guide marks
help the user insert the moisture trap.
1. Slide the moisture trap into position.
2. Press it down. Push tab out to remove.
Dedicated holes for attaching a mounting bracket. See "Accessories" if
a mounting bracket is required. 2 mm screws can be used if there is a
need to attach the monitor in a fixed position.
Luer lock connector for attaching sample line, Nafion tubing, or cannula.
The label contains the model number, serial number, manufacturing
date, manufacturer, UL mark, and other applicable symbols. See the
"Guide to Symbols" section for descriptions of the different symbols.
Every RespSense device has a unique serial number for identification.
Description
3
1
11