Nonin RespSense LS1R-9R Operator's Manual page 15

Table 2: Device Icons and Display Descriptions (Continued)
No. Name
Charge Indicator
4
Audible Alarm
5
Pause/Resume
ON/OFF
6
ETCO
7
2
RR
8
Status Text
9
Status Text
10
Alarm Symbol
11
Respiration Graph
12
Battery Indicator
13
Trend RR
14
This indicator is green whenever the power supply is connected
and the battery is charging.
NOTE: When the external power supply is disconnected, the
device automatically switches to battery power without loss of
functionality.
Audible alarms alert the operator when readings are outside the
preset limits.
The operator can temporarily disable the audible alarm by
pushing the Audible Alarm Pause/Resume button. Alarms will be
inactive for approximately 2 minutes or until the operator presses
the Audible Alarm Pause/Resume button again. This button does
not disable the visual alarms.
The current alarm status displays on the LCD (see #11 below).
This button turns the monitor ON or OFF.
Press the button for more than 1 second to turn the monitor off.
Displays the volume of end tidal CO
shown as mmHg or kPa.
The value is updated after each breath without averaging.
Displays the respiratory rate in breaths per minute.
The value is the mean of four breaths.
Shows alarm messages for the battery. See "Alarms" section for
more information.
Shows alarm messages for the capnometer. See "Alarms"
section for more information.
Space for alarm symbol. No symbol means audible alarms are
enabled.
A bell with broken lines indicates that audible alarms are paused.
A bell with solid lines indicates that audible alarms are disabled.
Displays a graph of the CO
Displays the battery status. See "Checking Battery Capacity" for
more information.
Displays a trend graph of the respiration rate. This scale is fixed
and cannot be changed.
Description
in expired air. ETCO
2
in expired air (capnograph).
2
is
2
9