HMS Intesis INMBSPAN016O000 User Manual page 25

Modbus Server – Panasonic
TM
Intesis
In addition to these settings, it is possible to modify some Modbus parameters to adapt the Modbus
communication to every installation. Usually, these settings should be left by default for a proper
communication with the meter.
Once this part is concluded, close the window using OK button to save the changes.
3) Assign energy meters to the Panasonic outdoor units.
The link between the meters and the Panasonic system is done in the next table:
Figure 4.11 Energy meters table. Link between Modbus meter and Panasonic unit
To display the Panasonic outdoor units in this part of the configuration they must exist in Line 1 / Line 2
Configuration.
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
Figure 4.10 Detail for the Modbus configuration settings
User Manual r1.1 EN
URL https://www.intesis.com
25 / 36