SECTION 5
FIGURE 5.13
Bolt with metric thread
(1) resistance class, (d) thread diameter
INSPECTION
5.10 ADJUSTMENT OF DRAWBAR POSITION
Location of the drawbar should be selected individually depending on the height of the hitch
on the tractor that will pull the trailer. If possible, adjust the tractor hitch in such a manner that
the trailer drawbar is set in horizontal position.
Scope of adjustment activities
Immobilise trailer with parking brake.
Prevent the trailer from rolling by placing chocks under the wheels.
Drive the tractor to the trailer drawbar hitching eye.
Undo clamp nut (1) and move the clamp in a selected direction.
• Once, after purchasing the trailer, before first use.
• Every 12 months.
• Every 3 months during intensive work.
PRONAR T023, PRONAR T023M
5.33