Freescale Semiconductor metrowerks CodeWarrior User Manual page 13

Figure 2.1 Found New Hardware Wizard
NOTE
With the New Hardware Wizard, you will need to select the usbtap.inf file,
which is located on either the CodeWarrior CD-ROM under the \drivers directory
or at the Metrowerks website mentioned above. To do this:
1. Chose Install from a list or specific location (Advanced)
2. Click the Next button to continue
3. With the Browse button, navigate to the location of the usbtap.inf file.
USB TAP Users Guide
If you receive the message "unknown device," this means that either
the USB TAP device driver was not installed properly or that there is
a problem with either the USB port or the USB TAP device. Please
reinstall the USB TAP device driver manually as described above.
Setting up the USB TAP Emulator
Installing the CodeWarrior USB TAP Device Drivers
13