NOTE
What To Do Next
You can now install your software. See the IDE Users Guide or your targeting manual
about how to configure the debugger and run a confidence test.
For additional information about using the USB TAP with your target system, refer to
"Using the USB TAP" on page
USB TAP Users Guide
If you plug the USB 2.0 Cable into an USB 1.1 port, you will get a
warning in a Windows pop-up dialog box and the performance of the
USB TAP will be slower. Please disregard this warning if you only
have an USB 1.1 port.
19.
Setting up the USB TAP Emulator
What To Do Next
17