Setting Up The Usb Tap Emulator; Unpacking The Usb Tap Emulator - Freescale Semiconductor metrowerks CodeWarrior User Manual

Setting up the USB TAP
Emulator
This chapter explains how to set up the USB TAP emulator.
The sections are:
•

Unpacking the USB TAP Emulator

• Identifying the Components
• Installing the CodeWarrior USB TAP Device Drivers
• Connecting to the Target and your Host Computer
• What To Do Next
CAUTION
Unpacking the USB TAP Emulator
Your USB TAP emulator has been inspected and tested for electrical and mechanical
defects before shipping. Although the hardware was carefully packed, examine all
components for external damage.
When you unpack the USB TAP emulator, be sure to save the protective packaging in
case you have to ship or transport the USB TAP emulator.
If you find any damage, file a claim with the carrier and notify Metrowerks.
USB TAP Users Guide
The USB TAP emulator is subject to damage from electrostatic
discharge. When you use, handle, or transport the USB TAP
emulator, or connect or disconnect the USB TAP emulator from a
target system, always use proper anti-static protection measures,
including using static-free bench pads and grounded wrist straps.
2
11