Operator Positions; Safety Measures During Operation; Safety Devices - Optimum OPTi drill B 16H Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y

Before starting work on electrical parts or operating agents, following measures are to be
performed in the following order.

Disconnect all poles.

Secure against switching on.

Check if the machine is zero potential.
1.7

Operator positions

The operator position is in front of the bench drilling machine.
1.8

Safety measures during operation

CAUTION!
Risk due to inhaling of health hazardous dusts and mist.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. To do so, use a
suitable extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using
inflammable auxiliary materials (e.g. spirit) it is necessary to take additional preventive
measures in order to safely avoid health risks.
1.9

Safety devices

Use the bench drilling machine only with properly functioning safety devices.
Stop the bench drilling machine immediately if there is a failure on the safety device or if it is not
functioning for any reason.
It is your responsibility!
If a safety device has been activated or has failed, the bench drilling machine must only be
used if you

have removed the cause of the failure,

have verified that there is no danger resulting for the staff or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the bench drilling machine. The possible
consequences are

injuries may occur due to workpiece or parts of workpieces flying off,

contact with rotating parts,

a fatal electrocution,
The bench drilling machine includes the following safety devices:

an EMERGENCY STOP push button,

a drilling table with T-slots to fix the workpiece or a vice,

a protective cover for the pulleys with positioning switch,

a drill chuck guard, in order to prevent interference with the rotating tool.
WARNING!
The separating protective equipment which is made available and delivered together
with the machine is designed to reduce the risk of workpieces or fractions of them which
GB B16H | B16HV
Page 60
®
Translation of the original instructions
Safety
Version 1.1.8 dated 2018-9-13