Table of Contents
Advertisement
Available languages
Available languages
OPTIMUM
M A S C H I N E N - G E R M A N Y
4.7
Speed variation
Switch off the machine by
pressing the main switch.
the protective cover.
Open
Loosen the lever of the V-belt
tensioning.
Position the V-belt respectively
on the required transmission
stage.
Tighten the clamping lever again and thus tighten the belt drive.
Close the protective cover.
4.8
Drill depth stop
When
drilling
several
holes of the same depth
you can use the drill depth
stop.
Loosen the locking
screw and turn the
graduated collar until
the required drilling
depth matches with
the indicator.
Re-tighten the locking
screw.
Adjust the drilling machine table to the required height.
Retighten the clamping screws.
GB
B16H | B16HV
Page 78
®
V-belt
Lever
V-belt tension
TENSIONED
RELEASED
Img.4-4:
Lever V-belt tensioning
Locking screw
Drill depth stop
Scale
Img.4-5:
Drill depth stop
Translation of the original instructions
Operation
Version 1.1.8 dated 2018-9-13
Advertisement
Table of Contents
