Directed Xpresskit DBALL2 Manual page 27

Hide thumbs Also See for Xpresskit DBALL2:
Table of Contents

Advertisement

Quick Reference Guide
DBALL2-CHRYSLER Remote Start Ready (RSR) Installation
Parking Light Error Codes
The parking lights on your vehicle will flash a specific number of times 3 seconds
following an unscheduled shutdown or failure to start. Each flashing pattern is
described below.
Flashes
Diagnostic
1
Runtime expired.
2
Over-rev shutdown.
3
Low/No RPM.
4
Transmitter shutdown.
5
Brake shutdown.
6
Hood shutdown/Remote start safety override switch is ON*.
7
Remote start safety override switch is ON*.
* If the vehicle hood status is supported through data, safety override switch input
will report 7 flashes.
Remote Start Ready (RSR)
Remote Start Ready (RSR) is a function that enables the interface
module to remote start the vehicle completely on its own.
Consequently, there is no need for an aftermarket or an OEM remote
starter in order to start the vehicle from a distance.
3x OEM Lock Remote Start Activation
This solution includes the option to remote start your vehicle by pressing the Lock
button 3 times consecutively. If your vehicle allows the OEM remote to remain
active while the engine is running, you may shut down your remote starter by
pressing the Lock button 3 times once more.
Note: The range offered by OEM remotes is limited and typically requires you to be
within eyesight of the vehicle to control it.
List of Available Commands
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer to
your authorized installation center for more information.
Button(s)
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press
x1 +
rear hatch/tail glass release (optional).*
Press
x1 +
remote starter runtime.
* This output is configurable. see your authorized installation center for more
information.
once, then
to activate the
once, then
to reset the
© 2016 Directed. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents