Directed Xpresskit DBALL2 Manual page 18

Platform: DBALL2
Firmware: CHRYSLER Remote Start Ready (RSR) Installation
Turn the key to the OFF
3
position and remove it
from the ignition barrel.
Press LOCK or UNLOCK on the
factory transmitter. The LED turns
4
ON solid green OR orange for 3 seconds
and then turns off.
You have successfully completed the module programming sequence.
Key OUT
or
START
Press the Push-to-Start
(PTS) button once more
to turn the ignition OFF.
or
&
Solid
© 2016 Directed. All rights reserved.
Rev.: 20160908
Page 18
ENGINE
1X
PUSH
START
STOP
or
&
Solid Off