Directed DBALL2 Installation Manual

Directed DBALL2 Installation Manual

Firmware: chrysler4
Hide thumbs Also See for DBALL2:

Advertisement

Quick Links

Platform: DBALL2
Firmware:
CHRYSLER Remote Start Ready
Update Alert: Firmware updates are posted
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
This guide supports the installation of a
three (3) configuration options to control your system; 3x
SmartStart (all sold separately).
Remote Start Ready (
completely on its own. Consequently, there is no need for an aftermarket or an
start the vehicle from a distance.
Important!
This product is
NOT
Index
.................................
........
.....
....
......................................... ...............
Type 2....................................................................................................................................................................................................
SmartStart/XL202 Installation Notes.....................................................................................................................................................
Programming
......
.......
Module Reset........................................................................................................................................................................................
Hard Reset............................................................................................................................................................................................
....
.............................................................................................................
Feature Programming..........................................................................................................................................................
LED Diagnostics & Troubleshooting...............................................................................................................................
Parking Light Error Codes...........................................................................................................................................
Quick Reference Guide.........................................................................................................................................................................
SmartStart Compatible
SmartStart
200/
250
Ready (
RSR
) mode
®
Chrysler
and Dodge are registered trademarks and property of
4
DBALL
in Remote Start Ready (
RSR
) is a function that enables the interface module to remote start the vehicle
compatible with vehicles equipped with a manual transmission.
.......
...............................
..
...........................................................................................................
............. ........................................................................................................................
.
............. ......................................................................................................................
.
...................................
.............................................
Warranty...........................................................................................................................
Rev
ision
B
is equipped with D2D which means it can be connected to an interface module and used in
without
the use of
a remote starter.
their respective companies
(RSR)
Installation
on
the web on a regular basis. We recommend
RSR
). This solution offers
OEM
Lock Remote Start Activation,
..................
...............................................
............ .............
.
,
See the
Module Programming
.
RF
Kit or
OEM
remote starter in order to
..........
..........
.....................................................
....................................
.........
......
...........
.....................
....
............... .
section for more information.
© 2017 Directed. All rights reserved.
Rev.: 20170817
..........
02
..............
03
........
04
05
........ .
.
06
07
08
09
09
........
...
10
...........
11
...........
12
.....
14
...
15
16
Remote Start

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DBALL2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Directed DBALL2

  • Page 1: Table Of Contents

    Remote Start Ready ( ) mode without the use of a remote starter. See the Module Programming section for more information. ® Chrysler and Dodge are registered trademarks and property of their respective companies © 2017 Directed. All rights reserved.
  • Page 2: Vehicle Application Guide

    • Legend: PK: Transponder & Immobilizer Override DL: OE Door Lock & Alarm Controls KI: Key Interface & Ignition Switch RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status © 2017 Directed. All rights reserved.
  • Page 3: Installation Type 1

    Refer to the SmartStart/ (+) Parking lights: White/Brown Installation Notes for more information. White/Orange ,pin 5 If grounded, the vehicle will remote start. All adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 4: Vehicle Wiring Reference Chart (Type 1)

    White/Violet Data SKIM (Sentry Key Immobilizer Module) Black Immo. Ignition Pink/White SKIM (Sentry Key Immobilizer Module) Black Parking Lights White/Orange Driver kick panel. Driver Door Trigger Violet Third connector from top of BCM. Black © 2017 Directed. All rights reserved.
  • Page 5 You can connect to either a RFTD a SmartStart module. +12V Refer to the SmartStart/ Installation Notes for more information. If grounded, the vehicle will remote start. All adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 6: Type 2

    J1850 White/Violet Data SKIM (Sentry Key Immobilizer Module) Black Immo. Ignition Pink/White or Pink/Gray SKIM (Sentry Key Immobilizer Module) Black Parking Lights Brown/White Headlight switch. Black Driver Door Trigger Violet Drivers Door Module. Black © 2017 Directed. All rights reserved.
  • Page 7: Smartstart/Xl202 Installation Notes

    Combination Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information. & SmartStart Combination Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information. © 2017 Directed. All rights reserved.
  • Page 8: Module Programming

    & troubleshooting if the does not turn solid green orange within 15 seconds. When the turns OFF urn the key to the position Key OUT & and r emove from the ignition barrel. START © 2017 Directed. All rights reserved.
  • Page 9: Module Reset

    Wait 3 seconds until the LED turns solid orange , and w 10 more seconds & until the LED starts to flash orange red. Solid Flashes & Release the programming button. The turns solid red. Release Solid © 2017 Directed. All rights reserved.
  • Page 10: Feature & Option List

    A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user. © 2017 Directed. All rights reserved.
  • Page 11: Feature Programming

    2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the will turn orange for 2 seconds to confirm the end of the programming sequence. © 2017 Directed. All rights reserved.
  • Page 12: Led Diagnostics & Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to "Installation (wiring Flashes red MUX not detected. diagrams & vehicle wiring reference charts)" to check the connections. © 2017 Directed. All rights reserved.
  • Page 13 Refer to feature when RFTD feature is disabled. programing section for more information. An RSR feature file mismatch was detected. Please Flashes red Feature error. contact Technical Support. © 2017 Directed. All rights reserved.
  • Page 14: Parking Light Error Codes

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2017 Directed. All rights reserved.
  • Page 15: Limited One-Year Consumer Warranty

    CLAIM OR DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER ’S...
  • Page 16: Quick Reference Guide

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2017 Directed. All rights reserved.
  • Page 17 3 times, then to activate x3 + the panic mode. Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. © 2017 Directed. All rights reserved.
  • Page 18 Now you can remote start, lock and unlock your car just by pushing a button on your smartphone; using the SmartStart App from Directed, the leader in vehicle security and remote start. The simple graphical interface gives you control over the following features of your installed remote start or security with remote start system: Ÿ...

Table of Contents