Feature & Option List - Directed Xpresskit DBALL2 Manual

Platform: DBALL2
Firmware: CHRYSLER Remote Start Ready (RSR) Installation
Feature & Option List
It is recommended to configure all the features and options listed below using the configuration tool found on the module
flashing page on www.directechs.com. The web offers more options; however, manual configuration of the features is possible
using the information on this page.
* Default option
Feature Operation
1 RF Output Type
2 Unlock Driver Priority
3 Trunk
4 Aux1
5 Aux2
6 Heated Seats
Heated Seats/Defrost Temperature
Control
(Feature 6 must be enabled )
Note: If the Heated Steats feature is
7
activated, it can always be turned on
using the Aux2 command,
regardless of the temperature
setting.
Heated Seats Temperature Level
8
(Feature 6 must be enabled )
9 Smart OEM Alarm Control
Flashes / Option
1. Disabled*
2. RFTD Output
3. SmartStart
1. Driver Priority*
2. All
1. Trunk*
2. Right Sliding Door
3. Left Sliding Door
1. Trunk
2. Right Sliding Door*
3. Left Sliding Door
1. Disabled
1. Trunk
2. Right Sliding Door
3. Left Sliding Door*
1. Disabled*
2. Enabled
1. 32° Farenheit (0° Celsius)*
2. 23° Farenheit (-5° Celsius)
3. 41° Farenheit (5° Celsius)
4. Always ON
1. High*
2. Low
1. Disabled
2. Safelock
3. Enabled*
Description
Module is connected to a remote starter using a standard installation.
Module is connected to an XL202 using an RSR or RXT installation (when
available).
Module is connected to SmartStart using an RSR or RXT installation (when
available).
Unlocks only the driver door on first press and unlocks all doors on a second
press within 5 seconds.
Unlocks all doors on first press.
Will pop the trunk if available.
When available, will operate the right sliding door.
When available, will operate the left sliding door.
Trunk: Will pop the trunk if available.
When available, will operate the right sliding door.
When available, will operate the left sliding door.
3./4. Right/Left Sliding Door: When available, will operate the sliding door.
Will pop the trunk if available.
When available, will operate the right sliding door.
When available, will operate the left sliding door.
No operation.
If available, it will activate the Heated Seats Control feature (see feature #7)
When feature #6 (Heated Seats) is enabled, it will activate the heated seats
upon remote start when temperature is below 32 °F (0 °C).
When feature #6 (Heated Seats) is enabled, it will activate the heated seats
upon remote start when temperature is below 23 °F (-5 °C).
When feature #6 (Heated Seats) is enabled, it will activate the heated seats
upon remote start when temperature is below 41 °F (5 °C).
When feature #6 (Heated Seats) is enabled, it will activate the heated seats
at any temperature.
When Heated Seats are activated, they will be set to HIGH.
When Heated Seats are activated, they will be set to LOW.
The OEM alarm will not be controlled by DBALL upon remote start. No disarm
or arm command will be executed at the beginning or end of the sequence; it
must be controlled by the Remote Starter.
Smart OEM Alarm Control will behave like a standard Safelock feature on a
remote starter. It will unlock at the beginning of the sequence, and relock after
start and shutdown.
Smart OEM Alarm Control will synchronize with the OEM alarm so that it will
disarm and rearm the vehicle in the remote start sequence, only when
required. The reason for this is, factory alarm control must often be done by
lock or unlock operation. This could create unnecessary actions on door lock
modules, such as the horn to honk. When possible, Smart OEM Alarm
Control will monitor the alarm and door lock status to detect if the disarm or
rearm is required. If the vehicle is unlocked or is not equipped with factory
alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will
also monitor the remote starter actions so that the factory alarm control is not
done twice. A remote starter, for which the Safelock feature is active, will work
perfectly with this option and will make it invisible to the user.
Rev.: 20160908
Page 21
© 2016 Directed. All rights reserved.