YILMAZ PCC 6505 User Manual page 142

9. CUTTING LIST INFORMATION
TYPE (Column 27): It must be maximum 1 characters and in text format. (The type of profile placed should
be entered in this column. For example case, wing etc. The profile type should be in the following
format.)
A = Case
B = Wing
C = Wing with dripper
D = Outward Wing
E = Mullion profile
F = Sliding Case
G = Sliding Wing
H = Groined case
I = Dripspone case
For example, when introducing the profile, code A should be entered for case profile.
COLOR_CODE (Column 28):
profile placed should be entered in this column. The color code of the profile types should be in the
following format.)
5 = White
6 = Colored
7 = Upper part colored lower part white
8 = Upper part white lower part colored
For example, when introducing the profile, code 1 should be entered for white profile.
STILL_LENGHT (Column
support sheet size to be placed in the profile should be entered by multiplying by 10. For example, if
the length of the support sheet is 800 mm, it should be written as 8000.)
FRAME_NO (Column 30):
field represents the frame number.)
REMAINING_LENGHT (Column 31):
part of the profile placed as 6000 mm should be written here by multiplying by 10. For example, if the
remaining part is 40 mm, 400 should be written in this field).
It must be maximum 1 characters and in text format. (The color code of the
29): It must be maximum 8 characters and in text format. (In this area, the
It must be maximum 4 characters and in text format. (The value written to this
It must be maximum 8 characters and in text format. (The remaining
140