Language Selection Settings; Printer Settings - YILMAZ PCC 6505 User Manual

7. OPERATION
 The values specified here are the values indicating the distances where the pistons holding the profile
are opened while the robot drives the profile.

7.13. Language Selection Settings

 Click on

 The desired language is selected from the above menu and
 If there are parts of the user interface that are difficult to understand in the user interface and the user
wishes to use appropriate expressions, the following steps can be followed.

Button is clicked on the same menu.
 Press
button and enter the required password (5678).
 Click on
 The translated parts are represented by the yellow color above. In these parts, the user can write the
expression he / she can understand in his own language.
 Press the
button at the end of the process.
 For untranslated languages, the user can type in his own language the yellow marked columns below
by looking through any other language the user knows.

7.14. Printer Settings



Button prints test barcode.

Button is the button which enables the barcode label to be active during cutting.
 It should be printed after paper change. The device will detect the paper size.
 Every time the machine is turned on, you have to activate it by pressing the power button
the printer for 3 seconds. Otherwise, the printer will not work.
 The printer communicates via Ethernet.
menu from the list while on the cutting menu.
menu.
Buttons from the list while on the cutting list are related to the printers.
button is pressed.
126
on