YILMAZ PCC 6505 User Manual page 138

8. ALARMS AND DEFINITION
A30 Inverter Fault !..
A31 X Processing Servo Fault !..
A32 Y Processing Servo Fault !..
A33 Z Processing Servo Fault !..
A34 Saw Z Servo Fault !..
A35 Saw Servo Fault !..
A36 Robot X Fault !..
A37 Robot Y Fault !..
A38 Robot Z Fault !..
Stopped as profile not loaded
A39
!..
Data not downloaded from
A40
database !..
Outlet conveyor pulley not
A41
elevated !..
Claw not turned to vertical
A42
position (P15) !..
Claw not turned to horizontal
A43
position (P15) !..
A44
Claw not opened (P16) !..
A45
Profile not sash but frame !..
Inverter may give alert.
Servo may produce error due
to any kind of overload.
Servo may produce error due
to any kind of overload.
Servo may produce error due
to any kind of overload.
Servo may produce error due
to any kind of overload.
Servo may produce error due
to any kind of overload.
Servo may produce error due
to any kind of overload.
Servo may produce error due
to any kind of overload.
Servo may produce error due
to any kind of overload.
The process in the cutting list
is completed.
The process in the cutting list
is completed.

Piston may not be elevated
completely

If the piston is open, sensor
may not detect the piston

Piston may not turn into
vertical position completely
If the piston is open, sensor
may not detect the piston
Piston may not turn into
horizontal position
completely.
If the piston is open, sensor
may not detect the piston.

Claw piston may not open
completely.

If the piston is open, sensor
may not detect the piston
The entered type of profile
may be wrong or sensor, that
differentiates the type of
profiles, is not detecting.
Check the alarm of inverter. If
there is alarm, reset the alarm
on the screen. If the problem
insists, re-start the machine
after turning it off.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Reset the alarm on the screen.
Continue processing after
loading a new working list.
Continue processing after
loading a new working list.
Check valve of the piston or
sensor.
Check valve of the piston or
sensor.
Check valve of the piston or
sensor.
Check valve of the piston or
sensor.
Check sensor or profile.
136