Manual Movement Of The Machine's Units - YILMAZ PCC 6505 User Manual

7. OPERATION

7.8. Manual Movement Of The Machine's Units;

To move the saw angularly;
The angle of rotation of the saw is the axis "A". The saw can angularly move between "30 and 150
degrees" on its axis. To make this move;
degrees within the permitted limits
degrees within the permitted limits.
is.
o
30 degrees and 150 degrees), this angle can be reached by clicking on aciya git (go to angle)
button.
To move the saw up and down in the cutting direction;
The up and down movement of the saw in the cutting direction is the "A" axis. To make this move;

o The height which the saw is can be seen from
o If the height where the saw is wanted to go is written (between -30 and 170) in the white
window
desired height.
o As long as the
o As long as the
o At the
When the angular position where the saw is desired to go is entered (between
o As long as the
permitted limits.
o As long as the
permitted limits.
and
button is held, the saw moves towards 30
button is held, the saw moves towards 150
window it can be seen at what angle the saw
button is held, the saw moves down within the
button is held, the saw moves up within the
window.
button is pressed, the saw goes manually to the
122