Cutting List Information - YILMAZ PCC 6505 User Manual

9. CUTTING LIST INFORMATION

PRG_NO (Column 1):
written in this column.)
CUSTOMER_ CODE (Column 2):
has a current account code and if desired so, it will be written in this column.)
CUSTOMER_ NAME (Column 3):
written in this field).
STOCK_ CODE (Column 4):
written in this field. If the stock code has more character than 16, characters should be omitted from
the beginning or the end to decrease the number of characters to 16; if the stock code has less
characters than 16, zero (0) should be added to the beginning or the end to increase the number of
characters to 16. Stock code can be obtained from the manufacturer company).
STOCK_ NAME (Column 5):
profile is written in this column).
ORDER_NO (Column 6):
this column).
EXPLANATION1 (Column 7):
this column will be in the form of a barcode. The desired information can be stored in each character.)
EXPLANATION2 (Column
this column can be entered as any description.)
LENGHT (Column 9):
profile cutting measure, which must be written by multiplying by 10. For example, if the cut size is 755
mm, this value is entered as 7550. The cut size should be written by adding 6 mm welding margin).
INCH_MM (Column 10):
used is introduced to the machine. The format should be as written below ...)
0 = mm
1 = inch
FRAME_X (Column 11):
horizontal axis of the frame. The frame size must be entered here by multiplying by 10. For example,
876 mm should be entered here as 8760. This is the final state of the frame after welding.)
FRAME_Y (Column 12):
vertical axis of the frame. If the measure is 876 mm, the value should be entered here as 8760. This is
the final state of the frame after welding.)
POSE_NO (Column 13):
as the window number. For example, if there are 3 rooms in a house and 1 window in each room, a
pose number should be given to each window in each room. Pose1, Pose2, Pose3 etc.)
TROLLEY (Column 14):
trolley that the Profiles will placed on after the cutting process is finished.)
UNIT (Column 15): It must be maximum 3 characters and in integer format. (This is the number of the self
of the trolley that will carry the Profiles after the cutting process is finished.)
It must be maximum 4 characters and in integer format. (** Program number is
It must be maximum 12 characters and in text format. (If the customer
It must be maximum 24 characters and in text format. (Customer name is
It must be 16 characters and in text format (** Stock code of the profile is
It must be maximum 12 characters and in text format. (**Stock name of the
It must be maximum 6 characters and in text format. (**Order number is written in
It must be maximum 10 characters and in text format. (Information written in
8): It must be maximum 24 characters and in text format. (Information written in
It must be maximum 8 characters and in text format. (The value written here is the
It must be maximum 1 characters and in text format (With this column, the unit
It must be maximum 8 characters and in text format. (It is the measure of the
It must be maximum 8 characters and in text format. (It is the measure of the
It must be maximum 5 characters and in integer format. (It can also be considered
It must be maximum 3 characters and in integer format. (This is the number of the
138