YILMAZ PCC 6505 User Manual page 136

8. ALARMS AND DEFINITION
A10
T6 Piston not back
A11
T6 Piston not forward
Profile Feed Piston not
A12
retracted (P1) !..
Profile feed side piston not
A13
retracted (P2) !..
A14
Wrong Profile Height !..
Profile feed counter clamping
A15
piston not retracted (P3) !..
A16
Wrong Profile Width !..
A17
Inadequate profile length !..
Right piston of saw not
A18
retracted (P7) !..

Piston may not come back
completely.

If the piston is its back position,
sensor may not detect the piston.

Piston may not push forward
completely.


If the piston is its forward position,
sensor may not detect the piston.

Piston may not come back
completely.

If the piston is its back position,
sensor may not detect the piston.

Piston may not push forward
completely.


If the piston is its forward position,
sensor may not detect the piston.
The entered profile dimension may
be wrong.
Encoder reads wrong value

Piston may not come back
completely.

If the piston is its back position,
sensor may not detect the piston.
The entered profile dimension may
be wrong.
Encoder reads wrong value.
Profile is short.

Piston may not come back
completely.

If the piston is its back position,
sensor may not detect the piston.


If piston does not come back,
check valve and air pipes.


When the piston is its back
position and sensor does not
detect, adjust the position of the
sensor. If sensor still does not
identify the piston, sensor may
be broken.

If piston is not pushed forward,
check valve and air pipes.


When the piston is its forward
position and sensor does not
detect, adjust the position of the
sensor. If sensor still does not
identify the piston, sensor may
be broken.
Check valve of the piston or
sensor.

If piston is not pushed forward,
check valve and air pipes.

When the piston is its forward
position and sensor does not
detect, adjust the position of the
sensor.

If sensor still does not identify
the piston, sensor may be
broken.
If encoder reads wrong value,
calibrate the encoder.
Check valve of the piston or
sensor.
If encoder reads wrong value,
calibrate the encoder.
Check valve of the piston or
sensor.
134