Calibration Settings - YILMAZ PCC 6505 User Manual

7. OPERATION
home.
home.

7.6. Calibration Settings:

7.6.1. Length Calibration:
First, prepare a profile; measure the length take note, then leave it to the loading group.
 Click on
The relevant button should be clicked on to make the saw to set the A axis as home.
The relevant button should be clicked on to make the robot to set the Z axis as
The relevant button should be clicked on to make the robot to set the Y axis as
The relevant button should be clicked on to make the robot to set the X axis as home.
button when in the cutting menu from the list.
115