YILMAZ PCC 6505 User Manual page 114

7. OPERATION

The number of times the cutting operation is to be repeated is entered in this field.

 If the part has been cut, it will display "1", otherwise "0".

The cutting height of the profiles is entered in this field.

The cutting width of the profiles is entered in this field.

The profile information on the Y axis while the robot holds the profile is entered here.
This measure varies according to the profile used.

The information of the position the robot will have on the Z axis while going to hold the
profile will be entered here. This measure varies according to the profile used.
7.4.2. Multi Cut Mode
Multiple cutting mode. Many profiles in different size can be cut through the list in desired numbers and
number of cycles.


The field where the stock code information is entered.

Stock name field.
The information on the cutting angles is entered in this field.
The field where the customer name can be entered.
112