7. OPERATION
7.1. Start- Up Of Machıne
Turn on main power switch.
Wait for the operation of the computer.
When computer completes starting up, double click on
Commercial message screen opens. Touch the screen to skip the advertisement page
7.2. Choosıng Cuttıng Lıst
Open the main screen.
Touch on
icon.
Define the required position in the page and choose the list.
Confirm the selection.
The selected working list will appear on the screen.
7.3. Startıng The Operatıon
Place profiles on feeding conveyor according to the listed operations.
Press on the green button on feeding conveyor to move the conveyor forward.
Continue on putting the profiles together.
When start button is pressed, operation begins
7.4. Operation Modes:
Use the
button to select which mode to work on.
7.4.1. Single Cut Mode :
Single cut mode. Required data is entered in the relevant fields and cuts are made at the desired
dimensions and angles.
Stock code field
Stock name field
The desired dimensions of the cutting is written in this field.
to run software.
111