YILMAZ PCC 6505 User Manual page 118

7. OPERATION
 Click on
 After the robot holds the profile move the robot on X axis using
profile reaches to saw group click on

Click on
 Click on


"calibrate" button.
7.6.2. Saw Height Calibration:
 Click on
 Click on
 Click on
 First, set the axis as home.
Follow the following steps;
button in the manual movement screen that will open.
button and enter the required password (5678).
button.
Find the relevant menu on the page that will open.
After entering the profile length in the required field press on
button when on the cutting menu from the list.
button and enter the required password (5678).
button.
button at the same page.
116
buttons and once the