Korg Triton-Rack Parameter Manual page 246

Sample parameter chunk
Chunk ID ('SMP1')
Chunk size (32)
Sample name
Default bank (0–3)
Start address
2nd start address
Loop start address
Loop end address
Sample data chunk
Chunk ID ('SMD1')
Chunk size (12 + number of sample
databytes)
Sampling frequency
The sampling frequencies supported by the TRITON-
Rack is 48000/47619/44100/32000/31746/31250/29400/
24000/23810/22254/22050/21333/21164/20833/19600/
16000/15873/15625/14836/14700/14222/14109/13889/
13067/12000/11905/11127/11025/10667/10582/10417/
9891/9800/9481/9406/9259/8711/8000/7937/7813/
7418/7350/7111/7055/6945/6534/6000/5953/5564/
5513/5333/5291/5208/4945/4900/4741/4703/4630/
4356/4000/3968/3906/3709/3675/3556/3527/3472/
3267/3000/2976/2782/2756/2667/2646/2604/2473/
2450/2370/2352/2315/2178/2000/1984/1855/1838(Hz).
Attributes
Loop tune (–99...+99 cents)
Number of channels (1)
Sample size (8/16)
Number of samples
Sample data
• Attributes
Sample parameter attributes
MSB LSB
Compression ID
1: Compressed data 0: Un-compressed data
1: Not Use 2nd Start 0: Use It
1: Reverse 0: Forward
1: Loop Off 0: Loop On
Sample number chunk
Chunk ID ('SNO1')
Chunk size (4)
Sample number (0–)
Sample filename chunk
Chunk ID ('SMF1')
Chunk size (12)
KSF filename
If the .KSF filename is "SKIPPEDSAMPL", it will be
treated as a sample skipped during loading.
If the .KSF filename is "INTERNALnnnn", internal sam-
ples will be used.
Divided sample parameter chunk
[4 bytes] Chunk ID ('SPD1')
[4 bytes] Chunk size (12)
[16 bytes] The following up to the sample size is the same as in the
SMD1 chunk
[1 bytes]
Sampling frequency
[3 bytes]
Attributes
[4 bytes]
Loop tune
[4 bytes]
Number of channels
[4 bytes]
Sample size
Number of samples
[4 bytes]
Total number of samples in all divided files
[4 bytes]
Divided sample data chunk
[4 bytes] Chunk ID ('SDD1')
KSC(Korg SCript) file
These files are text files which contain a list of filenames for
.KMP/.KSF files which are to be handled together.
Lines beginning with # are ignored as comment lines.
The first line of the file must begin with "#KORG Script Ver-
sion 1.0" and subsequent lines (except for comment lines)
consist only of filename. Only files with an extension of
KMP/KSF are processed.
Filename conventions
.KMP filename for "Save All" or "Save All Multisamples"
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
variable length
When data is saved using "Save All," "Save All Multisam-
ple" or "Save One Multisample," the individual .KSF files
used by the Multisample (the .KMP file) are automatically
given filenames according to the following convention.
KSF filename convention (samples used by the multisample)
[4 bytes]
[4 bytes]
Likewise, when data is saved using "Save All" or "Save All
[4 bytes]
Samples," the individual .KSF files are automatically given
filenames according to the following convention.
[4 bytes]
[4 bytes]
[12 bytes]
First 4 characters of
multisample name
KMP filename convention
First 5 characters of Multisample number
multisample name The first multisample in internal memory is 000.
Sample number
The first sample of the multisample is 000.
Multisample number
The first multisample in internal memory is 000.
KSF filename convention (sample)
Sample number
The first multisample in internal memory is 0000.
[4 bytes]
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
239