097: Early Reflect (Early Reflections); 098: Lcr Long Delay (L/C/R Long Delay); 099: St/Cross Ldly (Stereo/Cross Long Delay); Lodamp (Low Damp) - Korg Triton-Rack Parameter Manual

097: Early Reflect
(Early Reflections)
This early reflection effect has more precise early reflections
with twice the maximum length of a normal-size effect
(Fx:041). You can create a very smooth and dense sound.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
EQ Trim
LEQ HEQ
+
EQ Trim
Right
Type
a
Selects the decay curve for the early reflection
ER Time
b
Sets the time length of early reflection
Pre Delay
c
Sets the time taken from the original sound to the first early reflection
Pre EQ Trim
d
Sets the input level of EQ applied to the effect sound
LoEQ (Pre Low EQ Gain)
Sets the gain of Low EQ
e
HiEQ (Pre High EQ Gain)
Sets the gain of High EQ

W/D (Wet/Dly)

Sets the balance between the effect and dry sounds

(Source)
f
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
098: LCR Long Delay
(L/C/R Long Delay)
This multitap delay outputs three Tap signals to left, right and
center respectively. You can set a maximum of 2,730msec for
the delay time.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
L Delay (L Delay Time)
Sets the delay time of TapL
a
Level
Sets the output level of TapL
C Delay (C Delay Time)
Sets the delay time of TapC
b
Level
Sets the output level of TapC
R Delay (R Delay Time)
Sets the delay time of TapR
c
Level
Sets the output level of TapR
C Fb (C Delay Feedback)
Sets the feedback amountof TapC
(Source)
d
Selects the modulation source of the TapC feedback amount
(Amount)
Sets the modulation amount of the TapC feedback amount
200
Early Reflections
Pre Delay
Sharp, Loose, Modulated, Reverse
10...1600ms
–15.0...+15.0dB
–15.0...+15.0dB
Dry, 1:99...99:1, Wet
L Delay
Level
C Delay
Spread
Level
Feedback
R Delay
Level
–100...+100
HiDamp (High Damp)
Sets the damping amount in the high range
e

LoDamp (Low Damp)

Sets the damping amount in the low range

InLvl Mod (Input Level Dmod [%])
Sets the modulation amount of the input level
f
Src (Source)
Selects the modulation source for the input level
Spread
Wet / Dry
g
Sets the width of the stereo image of the effect sound
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
h
Selects the modulation source of the effect balance
(Amount)
Wet / Dry
Sets the modulation amount of the effect balance
099: St/Cross LDly
Fx:041
(Stereo/Cross Long Delay)
This is a stereo delay, and can by used as a cross-feedback
0...200ms
delay effect in which the delay sounds cross over between left
and right by changing the feedback routing. You can set a
0...100
maximum of 1,360msec for the delay time.
Stereo In - Stereo Out
Left
Input Level D-mod
Stereo/Cross
Input Level D-mod
Off...Tempo
Right
–100...+100
Stereo/Cross
a
Switches between stereo delay and cross-feedback delay
L Delay (L Delay Time)
b
Sets the delay time for the left channel
R Delay (R Delay Time)
c
Sets the delay time for the right channel
L Fb (L Feedback)
Sets the feedback amount for the left channel
(Source)
d
Selects the modulation source of feedback amount
Wet / Dry
(Amount L)
Sets the modulation amount of the left channel feedback
R Fb (R Feedback)
Sets the feedback amount for the right channel
e
(Amount R)
Sets the modulation amount of the right channel feedback
Wet / Dry
HiDamp (High Damp)
f
Sets the damping amount in the high range
LoDamp (Low Damp)
g
0...2730ms
Sets the damping amount in the low range
InLvl Mod (Input Level Dmod [%])
0...50
Sets the modulation amount of the input level
h
Src (Source)
0...2730ms
Selects the modulation source for the input level
Spread
i
0...50
Sets the width of the stereo image of the effect sound
W/D (Wet/Dly)
0...2730ms
Sets the balance between the effect and dry sounds
(Source)
j
0...50
Selects the modulation source of the effect balance
(Amount)
–100...+100
Sets the modulation amount of the effect balance
Off...Tempo
Dry, 1:99...99:1, Wet
High Damp Low Damp
Delay
Stereo/Cross
Spread
Feedback
High Damp Low Damp
Delay
Dry, 1:99...99:1, Wet
0...100%
Fx:043
0...100%
Fx:043
–100...+100
Fx:037,
Off...Tempo
Fx:037
0...50
Fx:043
Off...Tempo
–100...+100
Wet / Dry
Wet / Dry
Stereo, Cross
0.0...1360.0ms
0.0...1360.0ms
–100...+100
Off...Tempo
–100...+100
–100...+100
–100...+100
0...100%
Fx:043
0...100%
Fx:043
–100...+100
Fx:037,
Off...Tempo
Fx:037
–50...+50
Fx:043
Off...Tempo
–100...+100