048: St.autopandly (Stereo Auto Panning Delay); 049: Lcr Bpm Delay (L/C/R Bpm Delay) - Korg Triton-Rack Parameter Manual

a: Ctrl Target
This parameter selects no level control, delay output control
(effect balance), or feedback amount control.
a: Pol, b: Threshold, b: Offset, c: Attack, d: Release
The "Offset" parameter specifies the value for the "Ctrl Target"
parameter (that is set to None), expressed as the ratio relative to
the parameter value (the "W/D" value with "Ctrl Target"=Out, or
the "Feedback" value with "Ctrl Target"=FB).
When "Pol" is positive, the "Ctrl Target" value is obtained by
multiplying the parameter value by the "Offset" value (if the
input level is below the threshold), or equals the parameter value
if the input level exceeds the threshold.
When "Pol" is negative, Ctrl Target value equals the parameter
value if the input level is below the threshold, or is obtained by
multiplying the parameter value by the "Offset" value if the level
exceeds the threshold.
The "Attack" and "Release" parameters specify attack time and
release time of delay level control.
Level
Dry
Envelope
Wet
Control Target=Out
Polarity= (–)
Wet
Control Target=Out
Polarity= (+)
048: St.AutoPanDly
(Stereo Auto Panning Delay)
This stereo delay effect pans the delay sound left and right
using the LFO.
Stereo In - Stereo Out
Left
High Damp Low Damp
Delay
Feedback
Delay
High Damp Low Damp
Right
LFO: Tri / Sin
LFO Shape
L Delay (L Delay Time)
a
Sets the delay time for the left channel
R Delay (R Delay Time)
b
Sets the delay time for the right channel
L Feedback
c
Sets the feedback amount for the left channel
R Feedback
d
Sets the feedback amount for the right channel
HiDamp (High Damp)
Sets the damping amount in the high range
e
LoDamp (Low Damp)
Sets the damping amount in the low range
LFO Wave (LFO Waveform)
Selects LFO Waveform
f
Shape (LFO Shape)
Determines how much the LFO waveform is changed
LFO Phase
g
Sets the LFO phase difference between the left and right
178
Dynamic Delay
Threshold
Release
Attack
(Ducking Delay)
Delay Time
Time
Wet / Dry
Pan
Depth
Pan
Wet / Dry
LFO Phase
0.0...680.0ms
0.0...680.0ms
–100...+100
–100...+100
0...100%
0...100%
Tri, Sine
–100...+100
–180...+180deg
Pan Freq (Panning Frequency)
h
Sets the panning speed
Pan Dep (Panning Depth)
Sets the panning width
(Source)
i
Selects the modulation source for the panning width
(Amount)
Set the modulation amount of the panning width
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
j
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
049: LCR BPM Delay
(L/C/R BPM Delay)
The L/C/R delay enables you to match the delay time with
the song tempo. You can also synchronize the delay time with
the arpeggiator or sequencer. If you program the tempo
before performance, you can achieve a delay effect that syn-
chronizes with the song in real-time. Delay time is set by
notes.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
Tempo
BPM
BPM
BPM
a
Selects MIDI Clock and assigns tempo
L Bs (L Delay Base Note)
Selects the type of notes to specify the delay time for TapL
b Times
Sets the number of notes to specify the delay time for TapL
Level
Sets the output level of TapL
C Bs (C Delay Base Note)
Selects the type of notes to specify the delay time for TapC
c Times
Sets the number of notes to specify the delay time for TapC
Level
Sets the output level of TapC
R Bs (R Delay Base Note)
Selects the type of notes to specify the delay time for TapR
d Times
Sets the number of notes to specify the delay time for TapR
Level
Sets the output level of TapR
Fx:043
C Fb (C Delay Feedback)
Sets the feedback amount of TapC
Fx:043
(Source)
e
Selects the modulation source for the TapC feedback
(Amount)
Sets the modulation amount of the TapC feedback
Fx:020
Time Over? >
f Displays an error message when the delay time exceeds the upper
Fx:034
limit
L Delay
Level
C Delay
Level
Feedback
R Delay
Level
Base Note x Times
Base Note x Times
Base Note x Times
0.02...20.00Hz
0...100
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Wet / Dry
Spread
Wet / Dry
MIDI, 40...240
,
,
1...16
0...50
,
1...16
0...50
,
1...16
0...50
–100...+100
Off...Tempo
–100...+100
----, OVER!