Table of Contents
Advertisement
Various messages
A
Are you sure ?
Meaning: This message asks you to confirm execution. To
execute press the [F8] ("OK") key. To cancel, press
the [F7] ("Cancel") key.
C
Can't copy/swap double size effect
Meaning: When copying or swapping an insertion effect,
you attempted to place a double-size effect in
IFX1 or IFX5.
Action:
Modify your settings so that a double-size effect is
not moved to IFX1 or 5, and execute again.
Completed
Meaning: Execution of the command ended normally.
D
Destination and source are identical
Meaning: When copying or bouncing, the same Multi or
pattern was selected for both the source and desti-
nation.
Action:
Select a different Multi or pattern for the source
and destination.
Destination is empty
Meaning: When editing, the pattern that was specified as
the destination contains no musical data.
Action:
Select a pattern that contains musical data.
Destination multi is empty
Meaning: The multi that was specified as the copy destina-
tion or bounce destination does not exist.
Action:
Execute the Create New Multi command in the
dialog box that appears when a new multi is
selected before copying or bouncing.
Destination multisample already exists
Meaning: A multisample already exists at the destination
(save location) multisample.
Action:
Either delete the multisample at the destination
(save location), or change the save destination
multisample number.
Destination multisample and source multisample are
identical
Meaning: The same multisample is selected for the source
and destination.
Action:
Select different multisamples for the source and
destination.
Destination sample already exists
Meaning: A sample already exists at the destination (save
location).
Action:
Either delete the sample at the destination (save
location), or change the save destination sample
number.
230
Destination sample data used in source sample
Meaning: Since the sample data at the destination (save
location) is also used by the source sample, it can-
not be overwritten.
Action:
Without using Overwrite, specify a different sam-
ple for the destination (save location).
Destination sample is empty
Meaning: The sample for editing is empty.
Directory is not empty
Meaning: When deleting a directory, files or directories exist
within that directory.
Action:
Delete all directories or files within the directory.
Disk not formatted
Meaning: When you attempted to perform a high-level for-
mat (quick format) of media, the media had not
been physically formatted yet.
Action:
Execute the Disk mode Utility "Format" to physi-
cally format the media (full format).
E
Error in formatting medium
Meaning: An error occurred while performing a physical
format (full format) or high-level format (quick
format) of the media.
Action:
Use other media.
Error in reading from medium
Meaning: An error occurred while reading data from a
medium.
Action:
Execute the reading operation once again. If the
same error occurs, it is possible that the data on
the disk has been damaged.
Error in writing to medium
Meaning: An error occurred while writing data to a
medium. (Verify error)
Action:
It is possible that the floppy disk has been physi-
cally damaged. Try another disk. Avoid using the
floppy disk that produced the error.
F
File already exists
Meaning: When executing a Create Directory or File
Rename operation, a directory or file of the same
name already exists on the disk.
Meaning: When executing the Disk mode Utility "Copy"
command without using wild cards, the copy des-
tination contained a file of the same name as the
copy source.
Meaning: Meaning: When you executed the Disk mode util-
ity "Save Sampling Data" with a setting of All, All
Multisamples, All Samples, or One Multisample, a
directory with the same name as the directory that
the TRITON-Rack attempted to create already
existed on the disk.
Action:
Either delete the existing directory or file, or spec-
ify a different filename.
Advertisement
Chapters
Table of Contents
