Table of Contents
Advertisement
Clicking Transfer → Capture Text → Pause while capturing to a text file pauses the
4.
operation. Received characters and locally echoed sent characters are not saved to the text
file while capture is paused, the Resume and Stop Capture commands are available, and
the Select File and Pause commands are unavailable.
Clicking Transfer → Capture Text → Resume while the capture is paused resumes
5.
capturing text to the current file. The Pause and Stop Capture commands are available,
and the Select File and Resume commands are unavailable.
Clicking Transfer → Capture Text → Stop Capture while actively capturing, or while
6.
capturing is paused, will stop capture to the active file and close it. At this point, the menu
items return to the default state, with Select File enabled and all other items disabled.
7.
If you exit the MSTTERM program while the capture is active or paused, the text file closes.
10.6.2 Sending Text File
Clicking Transfer → Send Text File... opens a dialog box where you can select a .TXT file and click
Open to transmit the contents of the file to the micro-board through the M-Station USB Interface.
Clicking Cancel closes the dialog without sending the file. Characters in the text file are sent as if typed
on the keyboard. They are not echoed to the screen, unless echoed by the micro-board, or unless
local echo is on.
10.6.3 Sending a Binary Key Value
Clicking Transfer→ Send binary key opens the bincode box. To transmit a specific binary value,
enter its decimal value and click OK. For example, entering a value of 10 sends a linefeed character
(hexadecimal value 0x0A).
10.7 Help Menu
The Help menu displays the name, version, date, and copyright information for the MSTTERM
program.
67
M-Station Baseboard
Advertisement
Table of Contents
