Table of Contents
Advertisement
M-Station Baseboard
The memory image is sent to the flash device, and the Status window reports the progress of the
operation by displaying the current number of block sent and the total number of blocks. For a 78K0
device, a block is 256 bytes; for a 78K0S device, a block is 128 bytes.
After the entire memory image is sent, if the data sent compares exactly with the data in the flash
device, the Status window displays "Verified". If the data sent does not compare exactly with the
device, the Status window displays "Verify failed" and you receive this error message.
9.3
Configure Command Button
Clicking the Configure command button in the FP4MST Flash Programming box opens a
Configuration box that is the same as the one for the OPTMST program described in section 8.
58
Advertisement
Table of Contents
