Fp4Mst Flash Programming; Filename: File To Be Programmed Or Verified - Renesas M-Station User Manual

Baseboard for 78k0 and 78k0s micro-boards

Table of Contents

M-Station Baseboard

The FP4MST program then checks the silicon signature in the device to verify that it matches the

signature specified in the .PRC file. If the signatures match, then the program continues.

9.2

FP4MST Flash Programming

The FP4MST Flash Programming box is the command window for flash programming.

9.2.1

This box shows the selected user program object file for flash programming. The NEC Electronics

78K0 or 78K0S software development tools generally produce this file after compiling, assembling, and

linking the user program. The user program file must be in .HEX format produced by the OBJ2HEX

program, or in a binary .BIN file format saved by the ID debugger program.

If FP4MST has been run before and a file selected for programming, the location and file name are

remembered from the last time and shown again. This information is stored in the system registry.

To select a new file, click the Browse... button to open a file.

Table of Contents