Table of Contents
Advertisement
13. If you have installed the driver by connecting to a low-speed USB port, you may at this point
see a warning message. Refer to subsection 6.3.3.1.
14. If you have installed the driver by connecting to a high-speed USB port, you may need to go
through the installation steps again. Refer to 6.3.3.2.
15. To verify driver installation, connect the M-Station to the system.
16. Click Start → Control Panel → System.
17. Select the Hardware tab and then the Device Manager tab.
18. Expand the Universal Serial Bus controllers list.
19. If the list shows the NEC M-Station-USB-IF-1 file, installation is complete and the driver is
ready for use
31
M-Station Baseboard
Advertisement
Table of Contents
