Table of Contents
Advertisement
M-Station Baseboard
3.7.3
Inter-Board Connectors
Two 100-pin connectors connect the M-Station's and micro-board's CPU signals, flash programming
interface signals, and control signals. Two 100-pin connectors also connect to the user breadboard
area so that the CPU signals can be connected to the M-Station's development hardware resources.
3.7.4
User Bread-boarding Area
The user breadboarding area is a 0.1-inch centered pin array consisting of eight rows of 32 pins per
row. Rows 1 and 2 are populated with "jumper posts" so that the signals on row 1 can be selectively
connected to row 2. All other rows are left unpopulated so that you may install jumper posts as
necessary.
Figure 8.
Bread-Boarding Area
10
Advertisement
Table of Contents
