M-Station Baseboard
11. ERROR MESSAGES AND POSSIBLE CAUSES
11.1 Possible FP4MST Error Messages and Causes
Various conditions can prevent the FP4MST program from starting normally.
•
No USB connection. If you attempt to start the FP4MST program without connecting the
M-Station to the computer through a USB cable, you receive the following error message.
Click OK. Check your hardware connections and then click Yes in response to the following:
•
Incorrect Settings for V
do not match the required values in the .PRC file, the FP4MST program does not try to turn
power on to the flash device, and instead displays the following message:
or V
. If the V
or V
DD
PP
DD
PP
68
voltage settings recorded by OPTMST