To turn off the power
Close the LCD screen or press the POWER button.
If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below.
On turning the camcorder on or off using the LCD screen or the
viewfinder
The power of the camcorder is turned on or off depending on the status of the LCD screen or the
viewfinder.
Status
LCD screen Viewfinder
Retracted
Open
Pulled out
Retracted
Closed
Pulled out
Notes
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off.
When you turn off the power of the camcorder, make sure that the viewfinder is retracted to the
original position.
When you make recording with the viewfinder only
Pull out the viewfinder (
) and close the LCD panel and then adjust the angle you want (
indicator on the viewfinder appears blurred, adjust the appearance using the viewfinder lens adjustment
lever located on the above of the viewfinder.
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder (
Power of the camcorder
On
On
Off
On
47
), and then adjust the angle (
). If the
).