Connector Panel - Sony HSC-300 Operation Manual

on the viewfinder screen while holding the RET button
pressed.
Note
The RET 1 button has priority over the RET (2/3/4) button if
both buttons are pressed.
c DISPLAY/MENU switch
This switch functions the same as the DISPLAY/MENU switch
on the front (page 9).
d ASSIGNABLE button
You can assign a function with ASSIGNABLE REAR on the
<SWITCH ASSIGN1> page of the OPERATION menu.
e Menu control knob (rotary encoder)
This knob functions the same as the menu control knob on the
front (page 9).
f LEVEL/MIC (intercom level control/microphone)
switch
To determine whether to use the INTERCOM LEVEL control
(page 10) on the front and to turn the intercom headset
microphone ON/OFF.
Switch position INTERCOM LEVEL
control on the front
REAR/ON Inactive
REAR/OFF
FRONT/OFF Active
g Line select switch
To select the intercom line:
PROD: Producer line
ENG: Engineer line
h INCOM (intercom) level control
To adjust the intercom audio listening level.
i PGM1 (program 1) and PGM2 (program 2) controls
To adjust the audio listening level of program 1 or program 2,
respectively.
CE type: Models for PAL areas
1 2
RET1 RET
PGM1 PGM2
MIC
LINE
PROD
OFF
ENG
LEVEL
ENG PROD TRACKER
REAR
FRONT
INTERCOM EARPHONE
6 7 8 9 0
1 to 5 are the same as those of the UC type.
f MIC LINE (intercom microphone line) switch
To select the talk line for intercom:
PROD: To talk over the producer line
OFF: To turn off the headset microphone for the intercom line
ENG: To talk over the engineer line
Headset microphone
ON
OFF
3 4 5
2 3 4
ASSIGNABLE
DISPLAY
OFF
MENU
qa
g LEVEL switch
REAR: The intercom audio listening level is adjusted with the
ENG or PROD control on this panel.
FRONT: The levels adjusted on the rear panel can be totally
adjusted with the INTERCOM LEVEL control on the front.
h ENG (engineer line) control
To adjust the intercom audio listening level of the engineer line.
i PGM1 (program 1) and PGM2 (program 2) controls
To adjust the audio listening level of program 1 or program 2,
respectively.
j PROD (producer line) control
To adjust the intercom audio listening level of the producer
line.
k TRACKER control
To adjust the intercom audio listening level at the TRACKER
connector on the connector panel.

Connector panel

1 2 3 4 5
RET CTRL
TRACKER
DC OUT
MIC1
+
LINE MIC 48V FRONT
DC IN AUDIO IN
10.5-17V
CH1
8
a DC IN (DC power supply input) connector (XLR 4-pin)
For connection to an AC-DN10 AC Adaptor, etc. to supply
power to the camera. (When a CCU is connected, this
connector cannot be used.)
b DC OUT (DC power supply output) connector (4-pin)
To supply power to a script light or equivalent (12 V DC, max.
0.5 A).
c TRACKER connector (10-pin)
For external interfaces, such as intercom and tally.
d RET CTRL (return control) connector (6-pin)
For connection to a CAC-6 Return Video Selector.
e PROMPTER/GENLOCK/RET IN (prompter signal
output/external sync signal input/VBS return input)
connector (BNC type)
• When a CCU is connected, this connector outputs a VBS
prompter 1 signal.
• When the camera is used in standalone status without
connecting a CCU, use this connector for input of an
external sync signal (BB or 3-level sync). If a VBS signal is
input, you can check the input image by pressing the RET
button.
6 7
REMOTE
PROMPTER
/GENLOCK
/RET IN
TEST
+ OUT
REAR LINE MIC 48V
CH2
SDI
9 0 qa
Overview
11