TVLogic LVM-181S Operation Manual page 4

Multi Format LCD Monitor
01 CAUTION
 Unplug the power cord from the AC outlet before cleaning
the product. Use a damp cloth to clean the product. Do
not use liquid cleaners or aerosol cleaners.
 Unplug the power cord from the AC outlet if you do not
use the product for considerably long time.
 Do not use the product near water, such as bath tub,
washbasin, kitchen sink and laundry tub, swimming pool
and in a wet basement.
 Keep the product away from direct sunlight.
 Do not place the product on an unstable cart, stand, tripod
or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting
the product on a wall, be sure to follow the manufacturer's
instruction. Use only the mounting hardware
recommended by the manufacturer.
 When relocating the product placed on a cart, it must be
moved with the utmost care. Sudden stops, excessive force
and uneven floor surface can cause the product to fall
from the cart.
 Infrared devices can cause noise or malfunction under
condition as below.
a. Parts of the body come into contact with the infrared
transmitter or acoustic device.
b. Obstacles can cause electrical changes if there is a
partition in the middle or in the wall.
c. Exposure to radio interference from medical
equipment, microwave ovens, wireless LAN devices, etc.
with the same frequency band.
 The vents and other openings in the cabinet are designed
for ventilation. Do not cover or block these vents and
openings since insufficient ventilation can cause
overheating and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other similar
surface, since they can block ventilation openings. This
product is not designed for built-in installation; do not
place the product in an enclosed place such as a bookcase
or rack, unless proper ventilation is provided or the
manufacturer's instructions are followed.
 When installing the product on the rack, the inside of the
product would be overheated due to heat from other
devices nearby and the decreased air circulation, which
could damage to the monitor. To prevent the damage,
please have enough space for the monitor and use fans
to avoid heat and maintain the operating temperature.
(Refer to the specifications of the product).
 The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken
glass pieces in case the LCD panel breaks.
 Keep the product away from heat sources such as
radiators, heaters, stoves and other heat generating
products (including amplifiers).
4