One Touch Call Forward; One Touch Forward Operation - Iwatsu OM-KTD30 Owner's Manual

One Touch Call Forward:

This feature allows each extension user to program a flexible key which will,
with one press, complete call forwarding.
The following table shows all of the feature codes which can be placed on a
One Touch Forward key.
To begin:
1. Press Feature #3 and then press the selected flexible feature key that
you want to program (within three seconds) and press chg.
2. Using the codes on the following table, select the type of forwarding
using the Forward Code number, the destination (such as voice mail)
and select which type of call should be forwarded. When applicable
enter the No Answer time.
3. The telephone will return to idle.

One Touch Forward Operation

Forward Feature Forward
Type Code Code
F 2 0
Idle
F 2 1
Busy
F 2 2
Direct
Follow
F 2 3
Me
No
Answer
F 2 4
Busy/No
Answer
F 2 5
F 2 6
External
* External Call Forward requires a Pause at the beginning of the number. To enter
a Pause, press Feature 70, which is replaced with a P
Conditions
1. Intercom calls to a forwarded extension will receive a special tone
signifying that the extension called is forwarded.
2. The Auxiliary Lamp will not light in call forward mode if it has been
disabled by the attendant in Attendant Administration.
3. If any of the Call Forward features are programmed on a flexible key,
the LED associated with that key will light indicating that call forward
is active.
DIGITAL TELEPHONE USER GUIDE - 45
Destination ICM
ICM/CO
CO
87 VM ICM=1
10-37 Ext ICM/CO=2
82-89 Hunt Grp CO=3
Tele.No. *
No Entry
Answer Code
Time
F20872
F21872
F22872
F23872
1=10 / 2=20 F248722
3=30
4=40 / 5=50
1=10 / 2=20 F258722
3=30
4=40 / 5=50