Table of Contents
Advertisement
PULSE TO TONE (DTMF) CONVERSION
*
The Pulse to Touch Tone (DTMF) conversion feature enables the system to
use Dial Pulse (rotary) outgoing CO lines and access special services which
require DTMF tones. A limited number of applications may still only
support Pulse dialing for outgoing calls. After reaching an outside party, the
use of Touch Tone mode may be required.
Conditions
1. The dialing conversion can only be from pulse mode to tone DTMF
mode, not from DTMF back to pulse mode.
2. The Pulse-to-Tone code can be programmed in any speed dial bin.
3. When making a call on a CO line with Pulse Rotary dialing, the digits
following * are sent in DTMF tone mode.
RECALL
The Recall feature pertains to calls that are parked, on hold, or calls that
have been transferred to another extension. Calls which go unanswered after
a preset period of time are recalled to the extension which initiated the park,
hold, or transfer. Recall reduces the possibility that a call will go unattended.
Related Features
1. Call Forward
2. Transfer
3. Hold
4. Park
Conditions
1. Recalling CO lines follows Call Forward destination settings.
2. Recalls are not directed to the programmed Alternate Attendant
extension.
3. When a holding or transferred call begins to recall, the outside party
will hear transfer ring-back tone.
4. During recall, the CO line returns to System Hold allowing any
extension with normal CO line receive privileges to retrieve the
recalling line.
DIGITAL TELEPHONE USER GUIDE - 73
Advertisement
Table of Contents
