Table of Contents
Advertisement
10. Example 3 - Programming a feature on a programmable feature key:
Enter the feature code as seen in the feature code table at the
beginning of this chapter or press save to clear this key:
When entering in a new feature be sure to press the Feature key
first - the F must be the first key pressed or the feature will not
operate correctly. Example: Press the Feature key and dial 64 for
feature 64 to operate correctly.
lift the handset to exit programming.
Conditions
1. If an invalid code is dialed a single tone burst (error tone) will be heard
and the display will read CODE UNAVAILABLE.
2. Valid feature codes must be in the form of either Fn or Fnn where F is
the feature key and n is either a single-digit or two-digit code, including
asterisk * and pound # dialed from the dial pad.
3. Any feature key programmed with a code previously assigned to a
different feature key will cause the previously programmed feature key
to become unassigned.
4. Programmable Feature keys can be cleared of any feature code/directory
number by pressing save before entering a code/number.
DIGITAL TELEPHONE USER GUIDE - 72
Advertisement
Table of Contents
