Table of Contents
Advertisement
ATTENDANT POSITION
Any OM-KTD30 Digital Key Telephone may serve as the Attendant (At
default the Attendant is extension 10). The Attendant supports several
general system functions like Line Recall, Forced Incoming ICM Call
Forward, and Manual Night or Alternate Service Mode Operation as well as
Voice Mail Shutdown. The attendant receives all intercom calls directed to
the Attendant Directory Number (default = 0).
A second (alternate) attendant position may be selected for common sharing
of incoming CO line calls or load sharing during peak traffic periods.
The attendant's extension password allows for control of the system service
mode (Day/ Evening/Alternate/Time), System (Abbr) Speed Dial number
programming, Call Forward Status Lamp, Incoming Filter U, Incoming
Filter R, Sensor Function and voice mail shutdown. The attendant extension
may be connected to any digital extension port.
ATTENDANT ADMINISTRATION (ADMIN.)
Feature #0
Attendant Administration (Admin.) is used to set or modify the features:
Service Mode (Day/Alt/Eve/Time).
System (Abbr) Speed Dial Number programming.
Call Forward Status Lamp.
Incoming Filter U – Unrestricted.
Incoming Filter R – Restricted.
Sensor Function (Optional).
Shutdown Voice Mail (Optional).
To enter Attendant Administration Programming:
1. Press Feature #0.
2. Enter the Administrator Password (Default = 9999).
3. Press show.
4. Press next to navigate through the Attendant Administration features
Attendant Administration can be performed from any OM-KTD30 or OM-
8WRLS telephone. The Attendant Administration password is the same as
the Extension Password of the assigned Attendant Extension. For example,
if extension 10 is the attendant, then extension 10's password is used to enter
attendant administration programming area.
ATTENDANT POSITION USER GUIDE - 95
Advertisement
Table of Contents
