Table of Contents
Advertisement
DATA RATE
This parameter should not be changed.
DAY AND NIGHT MODES
Feature 63
The system can be programmed to follow a seven day, twenty-four hour
time schedule that will automatically switch the system from Day to Night
modes. These modes will affect the incoming call ringing assignment by
sending them to their programmed day or night destinations. In addition, the
Attendant can manually change the system from Day to Night mode. Doing
so will leave the system in that mode until it is manually changed. The
Feature code (Feature 63) is used to toggle between these modes.
Conditions
1. At default, no CO lines (outside lines) are programmed to ring an
extension.
2. The System Operation Mode must be set to Time Mode for the system
to automatically switch from Day to Night mode ringing.
3. When programming Time Service Mode switching, the input time
represents the time of day that the Service Mode will change to the
associated Service Mode.
DEFAULT FLEXIBLE KEYS / FEATURE KEY RESET
Feature 58
Default Flexible Keys, also known as Feature Key Reset, allows the user to
dial a code and bring all of the flexible keys back to factory default. This
requires entry of a valid extension password.
DIGITAL TELEPHONE USER GUIDE - 49
Advertisement
Table of Contents
