Table of Contents
Advertisement
HOT KEY ENABLE / DISABLE
Feature #6
Hot Key is the automatic operation of dial pad keys while the telephone is
idle. Once a digit is dialed from an idle extension, the digital telephone
becomes active, and begins processing all digits dialed. For example, one
extension can dial another just by dialing the extension number.
Conditions
1. It is not recommended to disable the Hot Key feature when Automatic
Line Select (Prime Line Pickup) Feature 95 is set to a CO line or Line
Group because it will make internal calling problematic.
2. If enabled, and the Feature key is the first key pressed, then the dial pad
becomes active. Therefore, when activating a feature and the feature key
is the first key pressed, there is no need lift the receiver.
HUNT GROUPS
82 - 89
There are eight Hunt groups that can be assigned for up to 24 members.
There are three types of hunt groups: All Ring, Linear Hunt, and Voice Mail.
Hunt groups 1 - 8 correspond to extensions (dial codes) 82 – 89. At default,
Hunt group 6, Dial Code 87, is reserved for Voice Mail and already contains
the voice mail extension numbers 56 - 63. Also, at default, Hunt groups 88
and 89 have all extensions preprogrammed into them, and Doorphones 1 and
2 (SLT Ports on the Option Module 36 and 37) are also programmed to ring
those hunt groups.
Linear Hunt
Stations in a linear hunt group ring in the order in which they are
programmed. If a member in the sequence is busy, the next available
member will ring. If all members are busy, the caller will hear ring no
answer. For instance, if Member 1 and Member 2 are busy, Member 3 will
ring. As soon as the busy members are no longer busy, they are placed back
into queue. When a pilot hunt group is dialed, the members are always called
in sequence, always starting with Member 1.
All Ring
When the pilot number for an all ring hunt group is dialed, all idle
extensions within the group will ring.
DIGITAL TELEPHONE USER GUIDE - 59
Advertisement
Table of Contents
