Table of Contents
Advertisement
HEADSET JACK
Feature 9#
The headset jack on all digital speakerphones will accept industry standard
2.5 mm headsets. A headset connected to the headset jack operates as an
integral component of the digital speakerphone. Once enabled, the speaker
key acts as the on / off button for the headset operation.
Conditions
1. The headset jack can be found next to the handset jack on the left side
of the telephone.
2. External headsets require that the handset be lifted each time a call is
answered.
HOLD, SYSTEM (COMMON) & I – HOLD INDICATION
This feature allows the user to place any call on hold by pressing the Hold
key. If the extension that placed the call on hold has a CO line programmed
on a Programmable Feature key, the LED will light, and flash slowly. All
other extensions with key appearances will be lit solid.
I – Hold Indication refers to the color difference of the LED's. When an
extension places a CO line on hold, I – Hold identifies that the call is
holding for that extension with a flashing LED. A CO line placed on hold by
a different extension will change colors and is lit solid.
Conditions
1. When the conference initiator presses Hold, the conference parties will
be placed on Exclusive Hold. This feature is used when adding
conference parties. The LED will flash green at the conference
initiator's extension.
2. Calls placed on hold will hear Music On Hold only if an external music
source is connected.
3. Calls placed on Exclusive (private) Hold, which have exceeded the
programmed Exclusive Hold time, will be automatically converted to
System Hold.
4. There is a distinctive slow flash rate for a CO line that is on System
Hold.
5. There is a distinctive rapid flash rate for a CO line that is on Exclusive
Hold.
DIGITAL TELEPHONE USER GUIDE - 57
Advertisement
Table of Contents
