Table of Contents
Advertisement
TOUCH TONE ON/OFF
Feature #1
Touch Tone On/Off can be used to customize a users' telephone tactile
response of dial pad key operation. When On, pressing the dial pad keys
causes a subtle beep tone to be emitted from the telephone speaker as an
assurance that the key operation was successful. The factory default =
Touch Tone Off.
Conditions
N/A
TRANSFER
Transfer is used to deliver calls from one extension to another extension
while maintaining the privacy of the connection. This means that calls can
be routed to system destinations (Extensions, Hunt Group, Voicemail Group,
etc.) in such a way that the wrong party cannot easily intercept them.
There are two types of transfers you can use: Screened (talk) Transfer and
Unscreened Transfer.
Screened Transfer – means that before the transfer is completed, the call
is announced to the destination extension. This transfer method provides
the transferring party with the option to reroute the call being transferred if
the selected destination is determined not appropriate.
Unscreened Transfer – simply delivers the call to the destination selected
regardless of the destinations readiness to accept the call.
Until the transfer is complete, the outside line is placed on Exclusive Hold
and can only be retrieved by the transferring telephone or the receiving
telephone.
Calls that are transferred are subject to a unique transfer recall time.
Transferred calls that go unanswered at the destination will recall (ring) to
the transferring party when this timer expires. There are two recall timers
that affect transferred calls; Transfer Busy Recall Time and Transfer Idle
Recall Time. Idle and Busy represent the status of an extension for
unsupervised transfer scenarios. (If the extension destination is busy the
Transfer-Busy Timer is used. If the extension destination is idle the
Transfer-Idle Timer is used.)
DIGITAL TELEPHONE USER GUIDE - 83
Advertisement
Table of Contents
