Table of Contents
Advertisement
SERVICE MODE
The system has two modes, day and night, which can be adjusted manually
by the attendant or automatically, when the system is set to Timed mode.
Specific features such as ringing destination, call forwarding and extension
dialing privileges will change based on the active Service Mode.
When in timed mode, the system will cycle through day and night modes
automatically, as defined in the time switching parameter in the database. If
the attendant places the system into either day or night mode manually, it
will remain in that mode until it is placed into a new mode or placed back
into timed mode.
In addition, the Attendant extension can program a key to cycle through day
and night modes without log into the attendant administration area. Feature
63 plus the Attendant Extension Password will switch from Day to Night or
Night to Day. When programmed on a key, the password can be
programmed to allow one touch operation.
SYSTEM SPEED DIAL PROGRAMMING
1. To enter a CO line flash (hook-flash) in a System Speed bin, press
Feature 3. The stored hook-flash is indicated by a / character at
telephones with displays. For example to enter FLASH1389 in a system
speed number, the entry is: Feature 3 + 1389. The displayed system
speed number is /1389.
2. To enter a Pause in a System Speed Dial, press Feature 70. A stored
pause is indicated by a P character. For example, to enter
9P01188635773141 into a system speed number the entry is 9 +
Feature 70 + 001188635773141. The displayed system speed number
is 9P01188635773141.
3. To chain one speed dial number to another, press Feature 1 plus the
speed dial number location. For example; if a very long telephone
number will not fit into one speed number location, split the number
into two locations. To store the number 12345678901234567890, for
example, into locations 20 and 21:
Enter into location 20: 1234567890 Feature 1 21.
Enter into 21: 1234567890.
Dial this sequence of numbers by accessing only Speed dial bin
location 20.
A maximum of 16 digits can be entered into any one speed dial bin.
ATTENDANT POSITION USER GUIDE - 98
Advertisement
Table of Contents
