Table of Contents
Advertisement
AUTOMATIC HOLD
Feature 94
This feature helps eliminate accidental lost calls by automatically placing the
current call on hold, while answering another CO line call. For example,
when a user is on CO Line 1, and presses CO Line 2, CO Line 1 will be
placed on Exclusive Hold automatically. Similarly, (while talking with
another extension) by pressing a CO line key, the intercom call is placed on
Exclusive Hold. The need to press Hold is eliminated, except if you want to
place a call on System Hold.
Conditions
1. The Feature Code (Feature 94) may be programmed under a flexible
key on a digital speakerphone. To enable/disable the feature, press the
flexible key.
2. If you access an idle line and skip to another line before dialing, the first
line will not be automatically placed on Hold. (Once a digit is dialed,
the line is consider in use, so the Automatic Hold feature is active.)
3. The Automatic Hold feature places a call on Exclusive Hold.
4. If you have the Automatic Hold feature programmed on a feature key,
the feature key lamp will light when the feature is enabled.
DIGITAL TELEPHONE USER GUIDE - 37
Advertisement
Table of Contents
