Table of Contents
Advertisement
3. Enter the number, up to 16 digits. If more are needed enter Feature 1
and enter another speed bin. This chains the two speed bins together
allowing you to dial one speed bin location and have both speed bins
dialed. Press save.
4. Enter the next speed bin to be programmed or press the speaker to exit.
Examples:
1. Example 1 - To enter a CO line flash (hook-flash) in a System Speed
number press Feature 3. The stored hook-flash is indicated by a /
character for telephones with displays. For example, to enter
FLASH1389 in a system speed number the entry is: Feature 3 + 1389.
The displayed system speed number is /1389.
2. Example 2 - To enter a Pause in System Speed Dial, press Feature 70.
A stored pause is indicated by a P character. For example, to enter
9P01188635773141 into a system speed number the entry is 9 +
Feature 70 + 001188635773141. The displayed system speed number
is 9P01188635773141.
3. Example 3 - To chain one speed dial number to another, press Feature
1 plus the speed dial number location to dial. For example, if a very
long telephone number will not fit into one speed number location, split
the number into two locations. To store the number
12345678901234567890 into locations 20 and 21:
Enter into location 20: 1234567890Feature 1 21.
Enter into location 21: 1234567890.
Dial this sequence of numbers by accessing only one Speed bin
location (location 20).
DIGITAL TELEPHONE USER GUIDE - 79
Advertisement
Table of Contents
