Table of Contents
Advertisement
PULSE TO TONE (DTMF) CONVERSION
*
The Pulse to Touch Tone (DTMF) conversion feature enables the system to
use Dial Pulse (rotary) outgoing telephone company lines and access special
services which require DTMF tones. A limited number of applications may
still only support Pulse dialing for outgoing calls, but after reaching an
outside party, the use of Touch Tone mode may be required.
Conditions:
1. The dialing conversion can only be from pulse mode to tone DTMF
mode, not from DTMF back to pulse mode.
2. The Pulse to Tone code can be programmed in any speed dial bin.
3. When making a call on a CO line with Pulse Rotary dialing, the digits
following the asterisk (*) are sent in DTMF tone mode.
RECALL
The Recall feature pertains to calls that are parked, on hold, or calls that
have been transferred to another extension. Calls which go unanswered after
a preset period of time are recalled to the extension which initiated the park,
hold, or transfer. Recall reduces the possibility that a call will go unattended.
Conditions:
1. Recalling telephone company lines will follow Call Forward destination
settings.
2. Recalls are not directed to the programmed Alternate Attendant
extension.
3. When a holding or transferred call begins to recall, the outside party
will hear transfer ring-back tone.
4. During recall, the CO line will return to System Hold. This allows any
extension with normal CO line receive privileges to retrieve the
recalling line.
SINGLE LINE TELEPHONE USER GUIDE - 115
Advertisement
Table of Contents
