Installing The System - Agilent Technologies 85225F Installation And User Manual

Related Topics
Use this chapter to learn how to first prepare the installation site, and
then receive, unpack, install, and configure the system. This chapter
includes important information on operational safety, as well as
instruction on preparing the installation site, unpacking the system,
ensuring the completeness of the system shipment, installing the work
surface, performing final system configuration, and powering- on the
system.
Agilent 85225F Performance Modeling System
Installation and User's Guide
2

Installing the System

To prepare the installation site
Environmental Requirements
Electrical Requirements
To receive the system
To unpack the shipment crate containing the rack cabinet
To verify the shipment
To install the work surface
To ensure your safety while using the system
Precautions for Performing Floating-Ground Measurements
Precautions for Avoiding Electrostatic Discharge
To connect the bias networks
To switch on power to the system
This completes the installation process. To confirm the functionality of the
system, continue to Chapter 3, "Verifying System Functionality,"
starting on page 91.
"Introducing the Agilent 85225F Performance Modeling System"
page 17
Agilent Technologies
64
64
64
65
68
74
76
80
87
89
66
78
79
on
63